Filter
Top Products
- 25 -
nVIDIA MCP73 Series Users Manual
►
OnChip IDE Device
Click <Enter> key to enter its submenu:
OnChip IDE Channel 0
The mainboard chipset contains a PCI IDE interface with support for two IDE channels.
Select “Enabled” to activate the rst and/or second IDE interface. Select “Disabled” to
deactivate an interface if you are going to install a primary and/or secondary add-in IDE
interface.
Primary Master/Slave PIO
Each IDE channel supports a master device and a slave device. These four items let you
assign the kind of PIO (Programmed Input/Output) were used by the IDE devices.
Choose Auto to let the system auto detect which PIO mode is best, or select a PIO mode
from 0-4.
Primary Master/Slave UDMA
Each IDE channel supports a master device and a slave device. This mainboard supports
UltraDMA technology, which provides faster access to IDE devices. If you install a device
that supports UltraDMA, change the appropriate item on this list to Auto. You may have
to install the UltraDMA driver supplied with this mainboard in order to use an UltraDMA
device.
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
OnChip IDE Channel0
Primary Master PIO
Primary Slave PIO
Primary Master UDMA
Primary Slave UDMA
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
Item Help
Menu Level
►►
↑↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enabled
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
►
IDE Function Setup
►
MCP Storage Config
OnChip USB
USB Memory Type
USB Keyboard Support
USB Mouse Support
HD Audio
MAC Lan
MAC Media Interface
Machine MAC(NV) Address
x MAC(NV) Address Input
IDE HDD Block Mode
POWER ON Function
x KB Power ON Password
x Hot Key Power ON
Onboard FDC Controller
Onboard Serial Port 1
PWRON After PWR-Fail
[Press Enter]
[Press Enter]
[V1.1+V2.0]
[Shadow]
[Disabled]
[Disabled]
[Auto]
[Auto]
[Pin Strap]
[Disabled]
Press Enter
[Enabled]
[BUTTON ONLY]
Enter
Ctrl-F1
[Enabled]
[3F8/IRQ4]
[Off]
Item Help
Menu Level
►
↑↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Press Enter
4.5.6 Integrated Peripherals
►
IDE Function Setup
Click <Enter> key to enter its submenu: