Filter
Top Products
- 27 -
nVIDIA MCP73 Series Users Manual
・
IDE HDD Block Mode
Enable this eld if your IDE hard drive supports block mode. Block mode enables BIOS to
automatically detect the optimal number of block read and writes per sector that the
drive can support. It also improves the speed of access to IDE devices.
・
POWER ON Function
This item selects the way you want your system to power on.
[Password]: Use a password to power on the system, select this option then press
<Enter>. Enter your password. You can enter up to 5 characters. Type in
exactly the same password to conrm, and then press <Enter>.
[Hot KEY]: Use any of the function keys between <Ctrl+F1> to <Ctrl+F12> to power
on the system.
[Mouse Left]: Double click the mouse left button to power on the system.
[Mouse Right]: Double click the mouse right button to power on the system.
[Any KEY]: Use any keyboard keys to power on the system.
[Button Only]: Use only the power button to power on the system.
[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to
power on the system.
・
KB Power ON Password
If you select [Password],this function will be activation.
Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again.
・
Hot Key Power ON
If you select [Hot Key], this function will be activation.
Available options: Ctr-F1~F12
・
Onboard FDC Controller
This option enables or disables the onboard FDC controller.
・
Onboard Serial Port 1
This item determines which I/O addresses the onboard Serial Port controller will access.
[Auto]: The system automatically select an I/O address for the onboard Serial Port.
[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allow you to manually select an
I/O address for the onboard Serial Port.
[Disabled]: Disables the onboard Serial Port.
・
PWRON after PWR-Fail
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
4.5.7 Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function
ACPI Suspend Type
Power Management
Video Off Method
HDD Power Down
Video Off In Suspend
Soft-Off by PBTN
WOL(PME#) From Soft-Off
WOR(RI#) From Soft-Off
Power-On by Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
HPET Support
[Enabled]
[S1(POS)]
[User Define]
[DPMS Support]
[Disabled]
[Disabled]
[Instand-Off]
[Disabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Enabled]
Item Help
Menu Level
►
↑↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enabled