Filter
Top Products
- 26 -
nVIDIA MCP73 Series Users Manual
IDE DMA transfer access
This item allows you to enable the transfer access of the IDE DMA then burst onto the
PCI bus and nonburstable transactions do not.
Serial-ATA Controller
Available options: [Disabled] [Enabled]
IDE Prefetch Mode
The “ onboard” IDE drive interfaces supports IDE prefetch function for faster drive
access. If the interface on your drive does not support prefetching, or if you install a
primary and/or secondary add-in IDE interface, set this option to “Disabled”.
•
Back to Integrated Peripherals Setup Menu
►
MCP Storage Cong
Click <Enter> key to enter its submenu:
Phoenix - AwardBIOS CMOS Setup Utility
MCP Storage Config
SATA Operation Mode
x SATA Pri-Master RAID
x SATA Pri-Slave RAID
x SATA Sec-Master RAID
x SATA Sec-Slave RAID
[IDE]
Disabled
Disabled
Disabled
Disabled
Item Help
Menu Level
►►
↑↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
IDE
SATA Operation Mode
This option allows you to select SATA function.
SATA 0 Pri-/Sec- Master/Slave RAID
This option allows you to enable or disable SATA Primary/Secondary RAID.
This is congurable only when “SATA Operation Mode” is set to “RAID”.
•
Back to Integrated Peripherals Setup Menu
・
OnChip USB
This option allows you to disabled the USB function or select the mode of USB.
・
USB Memory Type
Available options: [Base Memory (640K)] [Shadow].
・
USB Keyboard Support
This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS]
in OS environment.
・
USB Mouse Support
This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS]
in OS environment.
・
HD Audio
Available options: [Auto] [Disabled].
・
MAC Lan
Available options: [Disabled] [Enabled].
・
MAC Media Interface
Available options: [Pin Strap] [MII] [RGMII].
・
Machine MAC(NV) Address
Available options: [Disabled], [Enabled].
・
MAC(NV) Address Input
This is conguration only when "Machine MAC(NV) Address" is set to "Enabled".