Filter
Top Products
English 3
Getting Started
Connecting to an
IBM-compatible
Desktop PC
To connect to an IBM-compatible desktop computer:
1 Set the computer display resolution to XGA (1024x768).
2 Disconnect the PC monitor cable from the monitor output connector
on the computer.
3 Connect the VGA/SVGA cable to the Computer In connector on the
projector and to the monitor output connector on the computer.
Figure 3: Connecting to an IBM-compatible Desktop PC
If the computer resolution is lower than XGA, the projector automatically
resizes the image to fill the screen. If the resolution is higher than XGA,
the projector displays a compressed SXGA image or a cropped 1024x768
window of an SXGA screen. If the image is cropped, use the direction keys
on the projector or remote control to adjust the display.
If you need to view the computer monitor and the projected image
simultaneously, using the 15connect the display to the built-in Monitor
Loop-Through connector on the projector.
To use the Monitor Loop-Through connection:
1 Attach the 15-pin HD gender changer to the Monitor Out connector on
the projector.
2 Connect the PC monitor cable to the 15-pin HD gender changer.
Monitor Out
connector
Computer In
connector