Filter
Top Products
Using the Control Panel
9-18
Powerware
®
9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C
The System Setup Level 1 screen can be used to set the UPS date and time, the serial ports,
change the Level 1 password, and log out of Level 1. In addition, the Level 0 functions are
available. Figure 9-23 shows the System Setup Level 1 screen.
Use the
or pushbuttons to highlight the setup function screen desired, then press the
SELECT pushbutton to display the function screen.
The Level 1 screen times out after 60 minutes or can be logged out at any time b y
selecting the LOG OUT function from the menu screen.
ENTER PASS-
WORD
LOG OUT
CONTRAST ADJUST
VERSIONS
CHANGE PASSWORD
ENTER PASSWORD
SYSTEM SETUP LEVEL 1
SELECT
UNIT TYPE
Figure 9-23. System Set up Level 1 Screen