Filter
Top Products
Setup
19
Powerware
®
FERRUPS FE/QFE UPS (500 VA–18 kVA) Installation Guide : Rev A www.powerware.com
DD
A
B
BPE-01 BPE-02, 04, and 05
C
E
A
B
C
E
Figure 3. Bypass Switch Dimensions
Equipment Clearances
All cabinet sizes require the following clearances to allow for servicing
and adequate ventilation:
Table 5. Clearances for the UPS and Battery Cabinets
Dimensions (see Figure 4)
Sides (G) Front (H) Top (I) Back (J)
362 (91.5 cm) 362 (91.5 cm) 122 (30.5 cm) 42 (10.0 cm)
NOTE A minimum clearance of 4
2
(10 cm) is required on the sides, front, and back
and 12
2
(30.5 cm) above the UPS for proper ventilation.
NOTE For 4.3–18 kVA models with an internal bypass switch, measure from the back
of the switch.