Filter
Top Products
Installation
26
Powerware
®
5115 Rack-Mount User’s Guide : 164201449 RevA www.powerware.com
Wall-Mount Setup
Use the following procedure to mount the UPS to a wall:
1. Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
2. Attach four mounting brackets to the UPS as shown Figure 10.
Secure the short end of the mounting bracket to the UPS using
two of the supplied M3
l 6 screws.
WARNING
The UPS MUST be positioned with the front panel at the top to prevent a battery
hazard.
3. Secure the UPS to the wall using one bolt in each mounting
bracket as shown. Select the bolt according to the wall type.
Wall
Figure 10. Mounting the UPS to a Wall