Filter
Top Products
Intel
®
Modular Server Connection Guide
6
Task 2: Enabling External Ports
The Modular Server has external ports that each blade server can access. The
port numbers correspond to the slot number of each blade server. To enable a
port is to enable the external data connection, in this case, to access a LUN on
the VTrak.
To enable the external ports:
1. In the MSC screen, click the Chassis Back tab.
2. Click the SCM 1 component in the enclosure graphic.
3. Click Expansion Port in the SCM 1 Actions menu.
Figure 3. MSC Chassis Back screen
4. Check the box for Server 1 and click the Apply button.
Later in the process, you will return to this Task to enable another external
port, until all the ports are enabled. Enable just one port at a time.
Chassis Back tabSCM 1 Actions menuSCM 1