Filter
Top Products
Collecting Data
User’s Guide 23
3.
Use a bar code scanner (the Top Gun module or another device
attached to the PT2000), a magnetic stripe reader, or the keypad
to enter data.
z When scanning a bar code or running a magnetic stripe card
through the reader, the data is entered at the cursor position
in the application.
z When using the keypad to enter the data, the data is
displayed in the second line of the PT2000 display screen.
z Press the <ENTER> key, to send the data to the PC.
4. When finished collecting data, press the <F5> key
(
<Alpha>+<F1>) to exit.
Figure 3-8: The PT2000 Wedge Menu
Using PALPRO
PALPRO combines three Portable Applications Library applications into
a single, convenient program (refer to
page 8). With PALPRO installed
on the PSC portable, it is possible to switch from one application to
another without having to install each application.
Selecting a
PALPRO
Application
Complete the following steps to select a PALPRO application:
1. With the PALPRO Options menu displayed, press the <F2> key.
Figure 3-9: The PALPRO Options Menu
* PT2000 WEDGE *
¤
F5=EXIT
PALPRO OPTIONS
F3=WEDGE
F2=SELECT PROG
F4=PASSWORD
¤