Filter
Top Products
Collecting Data
User’s Guide 23
3.
Use a bar code scanner (the TopGun module or another device
attached to the PT2000), a magnetic stripe reader, or the keypad
to enter data.
When scanning a bar code or running a magnetic stripe card
through the reader, the data is entered at the cursor position
in the application.
When using the keypad to enter the data, the data is
displayed in the second line of the PT2000 display screen.
Press the <ENTER> key, to send the data to the PC.
4. When finished collecting data, press the <F5> key
(
<Alpha>+<F1>) to exit.
Figure 3-8: The PT2000 Wedge Menu
Using PALPRO
PALPRO combines three Portable Applications Library applications into
a single, convenient program (refer to
page 8). With PALPRO installed
on the PSC portable, it is possible to switch from one application to
another without having to install each application.
Selecting a
PALPRO
Application
Complete the following steps to select a PALPRO application:
1. With the PALPRO Options menu displayed, press the <F2> key.
Figure 3-9: The PALPRO Options Menu
* PT2000 WEDGE *
¤
F5=EXIT
PALPRO OPTIONS
F3=WEDGE
F2=SELECT PROG
F4=PASSWORD
¤
PT2000.book Page 23 Thursday, February 26, 2004 9:34 AM