Filter
Top Products
Getting Started
Using The Carrying Strap
The printer’s flexible carrying strap with multiple hook-and-loop fasteners is designed to be used in a variety of
ways to carry or mount the printer. The most common use will be to hang the printer from a belt or from the
optional shoulder strap as shown in
Figure 7. To use the strap in this way, simply pull the end of the strap from
the bottom of the printer, route it around the back side of your belt and fasten the strap back on itself as shown.
You may also use this method with the Shoulder Strap or keep the Carrying Strap in its original position.
Shoulder
Strap
Belt
Figure 7 - Carrying Strap on Belt or Shoulder Strap
8