Filter
Top Products
6–Windows Server 2008 and 2008 R2 Driver Installation
Windows Server 2008 and 2008 R2 Teaming Driver Installation and Configuration
NE0154601-00 C 6-7
If the base NIC driver was installed the first time the driver package was installed
(see the Typical Installation option in Figure 6-3), then you need to re-install the
driver to include Teaming:
1. Repeat Steps 1 through 5 from “Windows Server 2008 NIC Driver
Installation and Verification” on page 6-2.
The QLogic Advanced Network Config Service dialog box displays
(Figure 6-9).
Figure 6-9. Windows Server 2008—Advanced Network Config Service Setup
Wizard
2. Click Repair QLogic Advanced Network Config Service.
3. Click Finish.