Filter
Top Products
7–Windows Server 2003, 2008, and 2008 R2 Driver Configuration
QLogic Adapter Configuration
NE0154601-00 C 7-9
The Information tab contains information about the firmware version, BIOS
version, driver version, and other QLogic adapter properties.
The Diagnostics tab tests the QLogic adapter’s Flash, LED, and other
functions.
The Statistics tab displays information about the QLogic adapter.
The Flash update tab displays the current firmware version on the QLogic
adapter. You can update the firmware (if required).
The Driver tab displays driver information. From this tab, you can update,
uninstall, or restore a previous version of the QLogic adapter driver.
The Details tab displays detailed information about the QLogic adapter.
The Resources tab displays the resource settings for the QLogic adapter.
QLogic Adapter Configuration
To enable the connections to the QLogic adapter:
1. Open the Network Connections window in the Control Panel, or directly from
the desktop if the icon exists (Figure 7-2).
Figure 7-2. Network Connections Window
If an IP address has not been assigned, the QLogic adapter entry says
Limited or no connectivity.