Q-Logic 3000 Network Hardware User Manual


 
7–Windows Server 2003, 2008, and 2008 R2 Driver Configuration
NIC Driver Properties and Configuration
7-8 NE0154601-00 C
UDP Checksum Offload IPv4 This parameter enables/disables the UDP checksum
offload. There are four UDP checksum options (val-
ues):
0: Off
1: Transmit
2: Receive
3: Transmit/receive
Registry Key: UDPChecksumOffloadv4
Default: 3 (Transmit and receive checksum
enabled)
Values: 0, 1, 2, 3
UDP Checksum Offload IPv6
a
This parameter enables/disables the UDP checksum
offload. There are four UDP checksum options (val-
ues):
0: Off
1: Transmit
2: Receive
3: Transmit/receive
Registry Key: UDPChecksumOffloadv6
Default: 3 (Transmit and receive checksum
enabled)
Values: 0, 1, 2, 3
VLAN ID This parameter sets the VLAN ID for this interface
(also exposed through the standard OID).
Registry Key: VlanId
Default: 0 (no VLAN)
Max: 4094
Min: 0
Step: 1
Range: 0–4094
a
Windows Server 2008 only
Table 7-1. Advanced Properties Parameters (Continued)
Parameter Description