Q-Logic 3000 Network Hardware User Manual


 
NE0154601-00 C A-1
A Diagnostic Utility
Commands
Table A-1 lists user-level diagnostic utility commands for the Linux and Windows
Server OSs.
Table A-1. Diagnostic Utility Commands
Command Description
-i
--interface
This command specifies the interface type (Local Area Connec-
tion 1, Local Area Connection 2, etc.).
-a
--all
This command performs all tests, regardless of the default.
-D
--default
This command performs only the default test.
-R
--CRegs
This command tests all control registers (default).
-F
-FLASH
This command tests the Flash (default).
-I
--IRQS
This command tests the interrupt mechanism (default).
-L
--IntLB
This command performs an internal loopback test (default).
-H
--Hw
This command performs a hardware test (default).
-S
--LinkST
This command tests the link status (default).
-l
--LED
This command tests the LEDs (default).