Q-Logic QLA22XX Network Card User Manual


 
FC0151103-00 E A-1
Appendix A
Fast!UTIL
NOTE: The Fast!Util BIOS utility does not run on Sun SPARC systems. Refer to
the Software Installation Guide for the QLA2200 Board Family for
information regarding adapter configuration settings.
A.1
Introduction
This appendix provides detailed configuration information for advanced users who
want to customize the configuration of the QLA22xx board and the connected
devices.
The board can be configured using Fast!UTIL. Access Fast!UTIL by pressing
<ALT>-<Q> during the QLA22xx board BIOS initialization (it may take a few seconds
for the Fast!UTIL menu to appear). If you have more than one QLA22xx board,
Fast!UTIL asks you to select the board you want to configure. After changing the
settings, Fast!UTIL reboots your system to load the new parameters.
CAUTION!
If the configuration settings are incorrect, your QLA22xx board may
not function properly.
The following sections describe the Fast!UTIL options.
A.2
Configuration Settings
The first selection on the Fast!UTIL Options menu is Configuration Settings. These
settings configure the FC devices and the QLA22xx board to which they are
attached.