Filter
Top Products
A – Fast!UTIL Configuration Settings
FC0151103-00 E A-3
A.2.3
Restore Default Settings
The Restore Defaults option from the Configuration Settings menu restores the
QLA22xx board default settings.
A.2.4
Raw NVRAM Data
This option displays the adapter’s NVRAM contents in hexadecimal format. This is
a QLogic troubleshooting tool; you cannot modify the data.
A.2.5
Advanced Adapter Settings
From the Configuration Settings menu in Fast!UTIL, select Advanced Adapter
Settings. The default settings for the QLA22xx host adapter board are listed in
table A-2 and described in the following paragraphs.
Table A-2. Advanced Adapter Settings
Setting Options Default
Execution Throttle 1-256 16
Fast Command Posting Enabled or Disabled Enabled
>4GByte Addressing Enabled or Disabled Disabled
Luns per Target 0, 8, 16, 32, 64, 128, 256 8
Enable LIP Reset Yes or No No
Enable LIP Full Login Yes or No Yes
Enable Target Reset Yes or No No
Login Retry Count 0-255 8
Port Down Retry Count 0-255 8
Drivers Load RISC Code Enabled or Disabled Enabled
Enable Database Updates Yes or No No
Disable Database Load Yes or No No
IOCB Allocation 1-512 buffers 256 buffers
Extended Error Logging Enabled or Disabled Disabled