Filter
Top Products
A – Fast!UTIL Scan Fibre Channel Devices
FC0151103-00 E A-7
■ Command Reference Number. This setting is reserved for Fibre Channel
tape support, which will be implemented in a future version of the QLA22xx.
The default is Disabled.
■ Read Transfer Ready. This setting is reserved. The default is Disabled.
■ Response Timer. This setting contains the value (in 100-microsecond
increments) used by a timer to limit the time waiting accumulating multiple
responses. For example, if this field is 8, the time limit is 800 microseconds.
The default is 0.
■ Interrupt Delay Timer. This setting contains the value (in 100-microsecond
increments) used by a timer to set the wait time between accessing (DMA)
a set of handles and generating an interrupt. The default is 0.
A.3
Scan Fibre Channel Devices
This option scans the FC loop and lists all the connected devices by loop ID.
Information about each device is listed, for example, vendor name, product name,
and revision. This information is useful when configuring your QLA22xx board and
attached devices.
A.4
Fibre Disk Utility
This option scans the FC loop bus and lists all the connected devices by loop ID.
You can select a disk device and perform a low-level format or verify the disk media.
CAUTION!
Performing a low-level format destroys all data on the disk.
A.5
Select Host Adapter
Use this setting to select a specific QLA22xx board if you have multiple QLA22xx
boards in your system.