Filter
Top Products
Step 2: Attach the DSE-410D to your network’s switch or hub using a standard Cat 5
Ethernet cable, or directly to the LAN port on your computer using a crossover cable.
You can connect your serial devices now if needed.
If using Telnet for setup, refer to the Console mode section, Chapter 9, and
Chapter 5, then power up the DSE-410D.
Step 3: If using Windows, install the Quatech DSE-410D Manager software on the
configuring Computer.
Step 4: Power on the DSE-410D and check the status lights.
Step 5: Start the Quatech DSE-410D Manager from your program menu.
Step 6: Select Search to find the DSE-410D on your network.
Step 7: When found, Double-Click the DSE-410D to bring up the Server Properties
Configuration Screen. If more than one DSE-410D shows up, select the one that
matches the Default IP Address shown on the bottom of the DSE-410D (usually
192.168.0.1).
Step 8: Refer to the Server Properties section, Chapter 5 for details on the
Configuration parameters for each field. Configure and then Save/Update.
Step 9: If you want to use Virtual COM ports with Windows, install the Virtual COM
port or ports on each computer requiring access to the DSE-410D.
Default DSE-410D Settings
Server Name: Quatech
Serial Number:
Password: Blank
DHCP: Disable
IP Address: 192.168.0.1
Net Mask: 255.255.255.0
Gateway: 192.168.0.254
MAC Address Fixed – see bottom label
Baud Rate: 9600
Data/Parity/Stop: 8-N-1
Flow Control: None
TCP/UDP Ports: TCP Port 1 – 4000, Port 2 - 4001
Connection Mode: Server
Remote IP Address: 255.255.255.255
4 DSE-410D Owner’s Manual – Document Number: 940-0186-100
Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000
http://www.quatech.com