Filter
Top Products
DHCP reassigns a different IP address, the software will not be able to communicate
with the hardware. We recommend using a static IP address.
Net Mask
The default LAN net mask is configured for a Class C address. The user can change
this if desired. Default is 255.255.255.0
Gateway
The Gateway IP address allows users to access the DSE-410D from outside the LAN.
MAC Address
The MAC address is fixed, not adjustable. It is assigned in the factory. Every Ethernet
device manufactured has it own unique MAC address.
Link Status (Shown in Telnet or Console mode only)
Link status automatically displays the type of Ethernet connection. It will either
display 10 BaseT or 100 BaseTX in full duplex or half duplex. This will depend on
the LAN, switches, and hubs used in the LAN topology.
Server Serial Port (Select 1 or 2)
One port is shown. Make selections for Port 1 (Multi-Interface), then select Port 2
(RS-232) and make selections. Using the DSE-410D Manager, you must click Update
to store settings for that port before changing to the other port. Only the settings for
the port shown are stored. Using Telnet or Console mode, Save stores settings for both
ports.
Baud Rate (Set for each port)
The serial port baud rate on the DSE-410D must match the serial baud rate of the
connected device unless using Virtual COM mode. In Virtual COM mode, the
software program will establish serial settings. Use the arrow keys to change the
setting to the desired baud rate.
Data/Parity/Stop (Set for each port)
Set this to match the data format used by the device connected when the Virtual COM
mode is not being used. Telnet/Console: Tab to the Data/Parity/Stop field and arrow
to the desired selection.
Document Number: 940-0186-100 – DSE-410D Owner’s Manual 25
Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000
http://www.quatech.com