Filter
Top Products
10 Appendix A: RS-232, RS-422 Loopback Connections
For Transmit and Receive loopback, connect only those lines.
When Flow Control setting on the Serial device server is set for RTS/CTS, those lines
must be looped. Usually DTR and DSR must also be looped. The Flow Control setting
for the program must match the Server settings. The CD connection is needed by
some terminal programs to simulate Carrier.
The RS-485 Connections are half duplex, either Receive or Transmit, so another half
duplex device must be used to check operation.
Document Number: 940-0186-100 – DSE-410D Owner’s Manual A-1
Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000
http://www.quatech.com