Filter
Top Products
8. Next a serial menu is shown so you can match the Upgrade mode settings to
DSE-410D Server serial settings (which you noted in Server Properties). The
settings must match or the upgrade will fail.
9. Upgrade progress will be shown until the Upgrade was successful message is
shown. Select and exit from the Manager software.
10. When the upgrade is complete reset server. Use Telnet, Hyper Terminal
Winsock or Console mode to access the menu. Once the menu is open select
the reset button. When the DSE-410D is reset the build date listed at the
bottom of the menu will reflect the new firmware version.
Document Number: 940-0186-100 – DSE-410D Owner’s Manual 41
Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000
http://www.quatech.com