Filter
Top Products
14
The Basics
DATA
Appears when the data skip function is active, and in the trunking
mode when the dis connect tone detect function is off.
Appears when Signal Stalker I is active.
SCAN
Appears during channel scan.
LIST
Appears with numbers (1–5) during trunking. A bar indicates which
ID scan list banks are turned on for scanning.
SRCH
Appears during chain, direct, and ID searches.
SVC
Appears during Service Search mode.
PRI
Appears when the priority feature is turned on.
HOLD
Appears during chain, direct, service, and ID searches, and ID
monitor holds, and fl ashes while the scanner is temporarily
monitoring a programmed ID.
DLY
Appears when you select a Delay option.
L/O
Appears when you manually select a locked out channel and talk
group.
M-LOCK
Appears when you select a memory lock option.
Appears when you select a Skywarn channel.
PGM
Appears while you store a frequency into a channel, enter a
frequency range during a chain search, or program trunking
frequencies, fl eet maps, or ID memories while trunking.