Filter
Top Products
17
Beyond the Basics
chain search
Chain search lets you search through preset frequency ranges and
store found frequencies. You can also modify each range.
At least one bank must be active. If you disable all the
banks, the error tone beeps.
1. Press SRCH. SRCH appears.
2. (Optional) Press 0 – 9 to enable / disable search banks:
Bank No. Frequency (MHz) Step (kHz)
1 ...................................................29.0000 – 54.0000 ..............................5
2 ..................................................137.0000 – 147.9950 ..........................5
3 ...................................................179.7500 – 215.7500 ....................6000
4 ...................................................216.0000 – 224.9950 ..........................5
5 ...................................................225.0000 – 399.9875 .....................12.5
6 ...................................................400.0000 – 449.99375 ...................6.25
7 ...................................................450.0000 – 469.99375 ...................6.25
8 ...................................................470.0000 – 512.0000 .....................6.25
9 ...................................................806.0000 – 956.0000 .....................12.5
10 .................................................1240.0000 – 1300.0000 .................12.5
3. Press or to search up or down.
4. When the scan pauses, press HOLD/RESUME. To step through
the frequencies, press or .
5. To save a frequency, press E/PGM. The bank numbers fl ash.
6. Enter the target bank number. The smallest empty channel
number fl ashes over the frequency.
7. Press or to select to target channel.
8. Press E/PGM.
To program a search range, complete the following steps:
1. During a chain search, press and hold E/PGM. The lowest and
the highest frequencies of Bank 1 appear alternately.
2. Press the number of the bank you want to change. The lower
frequency range appears.
NOTE