Filter
Top Products
4
Quick Start
quick start
step 1: installing your scanner
You can mount your scanner as a base station or in your vehicle. If
you are unsure how to install your scanner in your vehicle, consult
your automobile manufacturer, dealer, or a qualifi ed installer.
base station
Attach the four protective rubber feet to the mounting bracket
when you use the scanner as a base station on a fl at surface such
as a desk, shelf, or table. Because the speaker is on the bottom
of the scanner, you can use the mounting bracket to elevate your
scanner off the surface for better sound.
vehicle mounting
To mount your scanner under or over the dashboard, use the
mounting bracket. Before installing, confi rm that your scanner
fi ts in the desired mounting area and you have all the necessary
materials to complete the task.
IMPORTANT: AVOID AIRBAG DEPLOYMENT ZONES. This can
prevent the airbag from performing properly and result in injury.
1. Use the supplied mounting bracket as a template to mark
positions for the two mounting screws.
2. At the marked positions, drill holes slightly smaller than the
screws. When drilling holes, be sure to avoid obstructions and
wires behind the mounting surface.
3. Attach the mounting bracket to the surface using the supplied
screws.
4. Slide the scanner into the bracket, aligning the scanner’s holes
with the holes in the bracket, and then screw the mounting
knobs into the scanner.
4