Filter
Top Products
35
Special Features
special features
PC programming
You can transfer programming data to your scanner using your PC
and an optional interface cable and software (available at your local
RadioShack or www.radioshack.com).
1. Turn off your scanner.
2. Connect the interface cable to your computer and then connect
the other end of the cable to the scanner’s PC/IF port.
3. Install the software to your computer and run the program.
4. To set up the program, click on Tools, select Confi guration, and
select PRO-433 (if necessary).
5. Turn the scanner on. PGM and WirEd appear automatically.
6. Send the data from the PC. Data frame numbers being received
appear.
If the scanner receives no data from the PC for more than
20 seconds, T-Err appears and wired programming stops.
When the scanner has successfully received all data, End appears.
If the scanner received an error while receiving data, End, d-Err,
and its frame number appear. C-Err indicates the packet number
where a communication error occurred. S-Err indicates the packet
number where a checksum error occurred. L-Err indicates the
packet number where a length fi eld error occurred.
scanner cloning
You can clone all the frequencies, trunking talk groups, and fl eet
maps programmed in your PRO-433 to another PRO-433 or PRO-
528 using an optional interface cable (available at your local
RadioShack or www.radioshack.com).
1. Turn off your scanner.
NOTE