Filter
Top Products
28
•Press
DELAY
if you want the scanner to pause 2 seconds
on this channel before it proceeds to the next channel
after a transmission ends (see “Delay” on Page 36). The
scanner also stores this setting in the channel.
4. To program the next channel in sequence, press
PGM
and
repeat Steps 2 and 3.
FINDING AND STORING ACTIVE
FREQUENCIES
Searching the Service Banks
Your scanner contains groups of preset frequencies called ser-
vice banks. Each service bank is associated with a specific ac-
tivity (see “Service Banks” on Page 20). You can search for fire/
police, air, ham, and marine transmissions even if you do not
know the specific frequencies that are used in your area. Then
you can store the frequencies you found into the scanner’s
channels or monitor memories.
Notes:
• You can use the scanner’s delay feature while searching the
service banks, see “Delay” on Page 36.
• To listen to the marine bank, see “Listening to the Marine
Bank” on Page 34.
1. Press
BAND
. The last selected band name (such as
HAM
),
SRCH
,
-b-
, frequency and the group number (if any)
appear.
2. To select a different band, repeatedly press
BAND
until the
desired band name appears on the display. After about 2
seconds, the scanner begins searching rapidly in that band
for an active frequency.
Notes:
• To reverse the search direction at any time, hold down
▲
or
▼
for about 1 second.
• To search up or down the band in small increments,
repeatedly press
▲
or
▼
. (See “Service Banks” on
Page 20 for frequency steps).
20-314.fm Page 28 Monday, December 13, 1999 12:55 PM