Filter
Top Products
37
To remove the lockout from a channel, manually select that
channel again, then hold down
L/O/L/O RVW
until
L/O
disap-
pears.
Notes:
• Your scanner automatically locks out empty channels.
• You can still manually select locked-out channels.
Locking Out Frequencies
To lock out a frequency during a service bank or direct search,
press
L/O/L/O RVW
when the scanner stops on that frequency.
The scanner locks out the frequency then continues searching.
You can lock out frequencies in both direct search and service
bank searches.
Note:
You can lock out as many as 50 frequencies during a
search. If you try to lock out more,
FLo
-FULL
appears (see
“Reviewing Locked-Out Frequencies” and “Removing Lockouts
From All Frequencies”).
Reviewing Locked-Out Frequencies
To review the frequencies you locked out, hold down
L/O / L/O
RVW
for about 2 seconds during a search, then repeatedly press
▲
or
▼
.
L-r
appears and the scanner displays all locked out
frequencies as you press
▲
or
▼
. When you reach the highest
locked-out frequency, the scanner beeps twice and returns to
the lowest locked-out frequency.
Removing Lockouts From All Frequencies
1. Hold down
L/O/L/O RVW
for about 2 seconds during a ser-
vice bank or direct search.
L-r
appears.
2. While holding down
MON/CL
, hold down
L/O / L/O RVW
.
Flo
ALL-CL
appears.
3. Press
ENT
.
L-r
000.000
appears. The scanner clears
any lockouts from all frequencies. Or, if you do not want to
clear the lockouts, press
MON/CL
.
4. To continue searching, press
BAND
.
20-314.fm Page 37 Monday, December 13, 1999 12:55 PM