Radio Shack PRO-79 Scanner User Manual


 
9
When
B
appears on the display and the scanner beeps continu-
ously, or if the scanner stops operating properly, replace the bat-
teries.
Warning:
Dispose of old batteries promptly and properly. Do not
burn or bury them.
Caution:
If you do not plan to use the scanner with batteries for
a month or more, remove the batteries. Batteries can leak chem-
icals that can destroy electronic parts.
USING AC POWER
You can power the scanner using a 9V, 300-mA AC adapter
(RadioShack Cat. No. 273-1767A) and a size C Adaptaplug
®
adapter (neither supplied). Both are available at your local Ra-
dioShack store.
Cautions:
You must use a Class 2 power source that supplies
regulated 9V DC and delivers at least 300 mA. Its
center tip must be set to positive and its plug must
fit the scanner's
PWR
jack. Using an adapter that does not
meet these specifications could damage the scanner or the
adapter.
Always connect the AC adapter to the scanner before you
connect it to AC power. When you finish, disconnect the
adapter from AC power before you disconnect it from the
scanner.
To power the scanner using an AC adapter, attach the Adapta-
plug adapter to the AC adapter so the tip reads positive (+), then
insert the Adaptaplug adapter into the scanner’s
PWR
jack.
Then connect the other end of the adapter to a standard AC out-
let.
USING VEHICLE BATTERY POWER
You can power the scanner from a vehicle’s 12V power source
(such as a cigarette-lighter socket) using a 9V, 300-mA DC
adapter and a size C Adaptaplug adapter (neither supplied).
Both are available at your local RadioShack store.
!
20-314.fm Page 9 Monday, December 13, 1999 12:55 PM