Radio Shack PRO-97 Scanner User Manual


 
12
The Basics
power sources
You can power your scanner from any of these sources:
internal non-rechargeable batteries or rechargeable
batteries (not supplied – see “Using Batteries”).
standard AC power (with an optional AC adapter – see
“Using AC Power”).
vehicle power (with an optional DC adapter – see “Using
Vehicle Battery Power”).
Connecting an AC or DC adapter to the scanner
disconnects internal batteries when you use the
supplied non-rechargeable battery holder, but it does not
disconnect internal batteries when you use the supplied
rechargeable battery holder.
If you install the rechargeable battery holder, you can
operate the scanner and recharge the rechargeable
batteries at the same time. See “Using Batteries” and
“Charging Rechargeable Batteries”.
If the scanner stops working properly after connecting it
to power, try resetting it. See “Initializing the Scanner”.
You must charge rechargeable batteries before you
use them the fi rst time. See “Charging Rechargeable
Batteries”.
using batteries
You can power the scanner with four AA batteries (not
supplied). For the longest operation and best performance,
we recommend alkaline batteries, available at your local
RadioShack store.
You can use either the supplied non-rechargeable battery
holder (black), or the supplied rechargeable battery holder
(yellow). If you use the rechargeable battery holder, we
Notes
Notes