Filter
Top Products
75
Beyond the Basics
9. To store the next ID memory in sequence, press e and
repeat Step 7.
10. Press SCAN to start scanning.
If you made a mistake in Step 4, Invalid ID value appears
and the scanner beeps when you press ENT. Start again at
Step 3.
You can enter either a decimal or AFS code for ED
(EDACS) IDs. The default setting is decimal ID entry.
When you press FUNC then 2, AFS Format appears for
about 2 seconds. Now you can enter the ID code with
AFS format.
If you entered an ID code that is already stored in another ID
channel, Dupl. ID of X-XX appears. If you want to store the ID
code, press ENT. To cancel the operation, press CL.
Notes
Notes