Filter
Top Products
14
The Basics
5. Replace the cover.
When battery power is low, Low battery! appears and
the scanner beeps continuously. When battery power
is depleted, the scanner turns itself off. Replace all four
non-rechargeable batteries, or recharge the rechargeable
batteries. See “Charging Rechargeable Batteries”.
Always dispose of old batteries promptly and properly.
Do not bury or burn them.
If you do not plan to use the scanner with batteries for a
month or longer, remove the batteries. Batteries can leak
chemicals that can destroy electronic parts.
charging rechargeable batteries
Your scanner has a built-in charging circuit that lets you
charge nickel-metal hydride (Ni-MH) or nickel cadmium (Ni-
CD) rechargeable batteries (not supplied) while they are in
the scanner. To charge rechargeable batteries, connect an
appropriate AC or DC adapter to the PWR DC 9V jack. For
best results we recommend RadioShack rechargeable nickel-
metal hydride (Ni-MH) 1600 mAh batteries.
The EPA certifi ed RBRC© Battery Recycling Seal on the
nickel-cadmium (Ni-Cd) battery indicates RadioShack
is voluntarily participating in an industry program to
collect and recycle these batteries at the end of their
useful life, when taken out of service in the United States
or Canada. The RBRC program provides a convenient
alternative to placing used Ni-Cd batteries into the trash
or the municipal waste stream, which may be illegal in
your area. Please call 1-800-THE-SHACK (1-800-843-7422)
for information on Ni-Cd battery recycling and disposal
bans/restrictions in your area. RadioShack’s involvement
in this program is part of the company’s commitment to
preserving our environment and conserving our natural
resources.
Notes
Notes
Notes
Notes