Filter
Top Products
37
Beyond the Basics
fi nding and storing active
frequencies
You can search for transmissions in the scanner’s
preprogrammed search bank. The search bank is divided
into seven search bands. You can change the search range of
Bank SR6 manually by setting the lower and higher ends of
the search range.
You can use the scanner’s delay feature while searching
the search bank. See “Using Delay”.
The scanner does not search locked-out frequencies
while searching ranges. See “Locking Out Channels or
Frequencies”.
searching a preprogrammed frequency range
The scanner contains these preprogrammed search ranges,
stored in the search bank (SR0-SR6).
Bank Band
SR0 Marine
SR1 CB
SR2 FRS/GMRS/MURS
SR3 Police/Fire
SR4 Aircraft
SR5 Amateur Bands
SR6 Limit search (User
changeable)
Follow these steps to select preprogrammed search bands
and search them for active frequencies:
1. Repeatedly press SRCH to select your desired search bank
(SR0, SR1, SR2, SR3, SR4, SR5, or SR6).
Notes
Notes