33
Viewing Frequencies Associated with a Car Number
After you store a car number and associate frequencies with that num-
ber, you can view all frequencies associated with the number.
1. Press
MAN
then
RACE.
RACE
and
Car No?---
appears.
2. Enter the car number. If the number is one or two digits, enter the
number, then press
RACE
. If the number is three digits, just enter
the number. One of the frequencies associated with the car num-
ber appears.
3. Repeatedly press s or t to view each of the frequencies associated
with the car number you entered. When you have viewed all the
frequencies, the display shows
---.---
.
Deleting a Frequency from a Car Number
1. Recall the car number.
2. Repeatedly press s or t until the frequency you want to delete
appears.
3. Hold down
DEL
for about 1 second. The scanner beeps and the
frequency disappears.
SCANNING BY CAR NUMBER
Once you store car numbers into channels, you can set the scanner so
it displays the car numbers you assigned to the channels as it scans
them.
To scan by car number, repeatedly press
RACE
until
BANK
and
RACE
appear, then press
SCAN
. As the scanner scans channels, the car
numbers you stored appear in the order you stored them into their
channels, from the lowest to the highest channel.
Notes:
• If no car number is assigned to a channel,
---
appears instead of
the car number.
•If
SQUELCH
is adjusted so you always hear a hissing sound, the
scanner does not scan properly.
20-513.fm Page 33 Wednesday, August 4, 1999 2:39 PM