Filter
Top Products
890-010 12/04/98 Page 93 © 1998 RadioLAN.
IO Connectors
10BaseT connector
The 10BaseT interface is provided through a shielded RJ-45 connector, which can be configured via the
MDI/MDI-X switch. The pin-out is described in the following table and figure:
Pin # Signal (MDI configuration) Signal (MDI-X configuration)
1 TX+ (Transmit to UTP) RX+ (Receive from UTP)
2 TX- (Transmit to UTP) RX- (Receive from UTP)
3 RX+ (Receive from UTP) TX+ (Transmit to UTP)
4 No connection No connection
5 No connection No connection
6 RX- (Receive from UTP) TX- (Transmit to UTP)
7 No connection No connection
8 No connection No connection
8 7 6 5 4 3 2 1