Filter
Top Products
890-010 12/04/98 Page 12 © 1998 RadioLAN.
4. Route a standard RJ-45 cable between
the station’s10BaseT Network Interface
Card and the 10BaseT jack on the
DockLINK. Connect the cable to the
DockLINK first, and then connect the other
end of the cable to the port on the
station’s Network Interface Card.
5. Set the MDI/MDI-X push-button switch to
the correct setting for the RJ-45 Dual-
modular cable.
Push the switch in for use with a
crossover cable.
Push the switch out for use with a
standard Category 5 cable.
1
2
10BaseT Ethernet
or Crossover Cable
10BaseT Network
Interface Card
3
Figure 8: Setting the MDI/MDI-X Switch