Filter
Top Products
CHAPTER 3: CONNECTING TO AND USING PORTS 13
4. When you are finished using RRC or MPC to manage the port, from the Connection menu,
click Exit.
5. Repeat steps 1 through 4 to connect to and manage other KVM ports.
Note: If the KVM port is on sleep mode and indicates “no video signal,” press the space bar on
your keyboard until you ‘wake up’ the port.
Connect to a Generic Port with In-band Access
1. In the Ports tree, select a Generic port to connect to and manage.
2. On the Ports menu, click In-band Access. Or, you can double-click on a port icon. The
Application Start-up Parameters screen appears.
Figure 14 Application Startup Parameters Window
3. If you specified the Target TCP Port number and Target Username while you configured
the Generic Port, they are already entered in the screen. Otherwise, you need to type them
now. Click OK or Cancel to exit without connecting.