95
E-DOC-CTC-20051017-0151 v1.0
Chapter 4
Basic Configuration
4.6.8 Interface Settings
Overview The Overview page gives you an overview of the current interface settings.
Configure The Configure page allows you to:
Change the IP address settings of the SpeedTouch™.
Change the DHCP IP address pool settings.
Assigning a new IP
address to the
SpeedTouch™
Under IP Addresses, proceed as follows:
1 Type the IP address of your choice (for example 192.168.1.1) in the left text
box.
2 Type subnet mask (for example 255.255.255.0) in the right text box.
3 Click Add.
Network devices using the same subnet mask can now access the
SpeedTouch™ using this IP address.
!
Before changing the DHCP pools, make sure that at least one IP
address of the SpeedTouch™ uses the same subnet as the IP
addresses in the DHCP pools.