RCA 605 Network Router User Manual


 
141
E-DOC-CTC-20051017-0151 v1.0
Chapter 5
Expert Configuration
5.4.3 Routed PPPoA
Introduction The Routed PPPoA configuration page allows you to add new Routed PPPoA
connection entries or to change settings of existing entries.
Creating a Routed
PPPoA connection
entry
To add a Routed PPPoA connection entry:
1 Click New.
2 In the Interface box, type a unique interface name (different from the MER
interface name).
3 In the Destination list, click the appropriate Routed Ethernet destination
indicated by the Routed Ethernet interface name
4 Type user name and password for the account at the ISP [optional].
5 Click Apply.
Additional configuration Once created, per Routed PPPoA connection, additional configuration is possible by
clicking:
Routing
Other
Routing Following fields are available:
Destination:
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Label:
Allows you to assign a label to this connection.
These parameters can only be modified when the link is down. Take the link
down first by clicking Hang-up.