RCA 608WL Network Router User Manual


 
144
E-DOC-CTC-20051017-0151 v1.0
Chapter 5
Expert Configuration
5.4.4 Routed PPPoI
Availability The ISDN modem is only fully functional after activating the ISDN software module
with the ISDN software module activation key. For more information, see
“5.2.10 Add-on” on page 120.
Introduction The Routed PPPoI configuration page allows you to add new Routed PPPoI
connection entries or to change settings of existing entries.
Creating a Routed
PPPoI connection entry
To add a Routed PPPoI connection entry:
1 Click New.
2 In the Interface box, type a unique interface name.
3 In the ISP profile list, click:
The name of a profile if you want to use an existing profile.
New to create a new profile. Type the name you want to assign to this
profile in the Enter Name box.
These ISP profile contain the ISDN parameters.
4 Type user name and password for the account at the ISP.
5 If needed, enter the ISDN parameters of your ISP.
6 Click Apply.
Additional configuration Once created, per Routed PPPoI connection, additional configuration is possible by
clicking:
1 Routing
2 Other
Routing Following fields are available:
Destination:
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Label:
Allows you to assign a label to this connection.
These parameters can only be modified when the link is down. Take the link
down first by clicking Hang-up.