Filter
Top Products
Chapter 2
Basic Installation
E-DOC-CTC-20050126-0005 v1.0
12
Powering the
SpeedTouch™
To turn on the SpeedTouch™, press the power button on the SpeedTouch™ rear
panel.
During the start-up procedure, the power LED on the front panel is lit red for some
seconds. As soon as the power LED is solidly lit green, your SpeedTouch™ is ready
for service. After another couple of seconds, also the DSL LED will light green.
If these LEDs do not light, please refer to ”Checking the LEDs” on page 33. A
comprehensive LED overview can be found in the SpeedTouch™ User’s Guide.
To turn off your SpeedTouch™, press the same button.