Filter
Top Products
126
6.4 The H8S/2378F E10A Emulator Functions
Notes: 1. Do not use an MCU that has been used for debugging.
2.
If the flash memory is rewritten many times, and the emulator is left for a few days,
data may be lost due to retention problems.
3.
If the flash memory is rewritten many times, the data will not be erased. If an error
message is displayed, exchange the MCU for a new one.
6.4.1 Emulator Driver Selection
Table 6.4 shows drivers which can be selected in the [E10A Driver Details] dialog box.
Table 6.4 Type Name and Driver
Type Name Driver
HS2378KCM01H E10A PC Card Driver 5
HS2378KCI01H E10A PCI Card Driver 5
6.4.2 Hardware Break Functions
Hardware Break Conditions: In the H8S/2378F E10A emulator, two break conditions can be
set (Break Condition 1,2). Table 6.5 lists the items that can be specified.
Table 6.5 Hardware Break Condition Specification Items
Items Description
Address bus condition Breaks when the MCU address bus value matches the
specified value.
Data bus condition Breaks when the MCU data bus value matches the specified
value. Bit or word can be specified as the access data size.
Read or write condition Breaks in the read or write cycle.
Table 6.6 lists the combinations of conditions that can be set in the [Break condition] dialog box.