Filter
Top Products
10
2.2.3 Installing under Windows
2000 Operating System
(1) When the emulator is a PCI card:
1. Log-on with an administrator-level user name.
2. Install the HDI. (When a component is selected, be sure to select [PCI Card Driver].)
3. Shut the operating system down and turn off the power to the host computer.
4. Insert the PCI-card emulator in a slot on the host computer. Refer to section 2.3,
Connecting the Host Computer with the Card Emulator.
5. Restart the host computer and log-on with an administrator-level user name. The hardware
is now recognized and the driver is automatically installed.*
(2) When the emulator is a PCMCIA card:
1. Log-on with an administrator-level user name.
2. Install the HDI. (When a component is selected, be sure to select [PC Card Driver
(PCMCIA)].)
3. Insert the PCMCIA-card emulator in the host computer’s slot. Refer to section 2.3,
Connecting the Host Computer with the Card Emulator.
4. The hardware is now recognized and the driver is automatically installed.*
Note: When [Found New Hardware Wizard] is displayed, select the [Search for a suitable driver
for my device (recommended).] radio button and then the [Specify a location] check box
to select the path to be searched for drivers. The location must be specified according to
the emulator type, as indicated below:
When using the PCI-card emulator: <Drive>:\DRIVERS\PCI\2000
When using the PCMCIA-card emulator: <Drive>:\DRIVERS\PCMCIA\2000
(<Drive> is the CD-ROM drive name.)