Filter
Top Products
( 26 / 40 )
5.3 Mounting the Rubber Legs
Mount the rubber legs (included) in the four corners of the board if using the M34551T2-MCU board
as an evaluation board. Figure 5.3 shows the positions of the mounting holes and method of mounting
the rubber legs. When mounting them, securely fasten the screws with a screwdriver, etc. Using the
board without the rubber legs could result in damage of the M34551T2-MCU board and target system
due to a short, etc.
Figure 5.3 Positions of the mounting holes and method of mounting the rubber legs