Filter
Top Products
Programs
75
2
Programs
You can store frequently used copy
job settings in the machine memory
and recall them for future use.
Storing a Program
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode
or program No. 10 as the mode to
be set when modes are cleared or
reset, or immediately after the op-
eration switch is turned on. See
p.94 “Change Initial Mode”.
❒ Paper settings are stored based on
paper size. So if you place more
than one paper tray of the same
size, the paper tray prioritized
with User Tools (System Settings)
will be selected first. See “Paper
Tray Priority” in “Tray Paper Set-
tings”, General Settings Guide.
❒ Programs are not deleted by turn-
ing the power off or by pressing
the {Clear Modes} key. They are
canceled only when you delete or
overwrite them with another pro-
gram.
A Edit the copy settings so all func-
tions you want to store in this pro-
gram are selected.
B Press the {Program} key.
C Press [Register].
D Press the program number you
want to store.
Note
❒ Program numbers with m
against them already have set-
tings in them.
Reference
p.76 “Changing a Stored Pro-
gram”
E Enter the program name with the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.
Note
❒ If you do not want to enter the
program name, proceed to step
F
.
AdonisC4-AE_copy_F_FM_forPaper.book Page 75 Thursday, May 12, 2005 4:17 PM