Filter
Top Products
5
Control Panel
This illustration shows the control panel of a machine that has all options fully
installed.
1. Screen Contrast knob
Adjusts display panel brightness.
2. Indicators
Display the status of the machine or indi-
cate errors.
• d: Add Staple indicator
• D: Add Toner indicator
• B: Load Paper indicator
• L: Service Call indicator
• M: Open Cover indicator
• x: Misfeed indicator
See “Control Panel”, General Settings
Guide.
3. {User Tools/Counter} key
•User Tools
Press to change the defaults and con-
ditions to meet your requirements.
•Counter
Press to check or print the counter val-
ue.
•Inquiry
Press to find where to order expenda-
ble supplies and where to call when a
malfunction occurs. You can also print
these details.
4. Display panel
Displays operation status, error messag-
es, and function menus.
5. {Check Modes} key
Press to check the entered copy job set-
tings.
6. {Program} key
Press to select the program mode. See
p.76 “Programs”.
7. {Clear Modes} key
Press to clear the previous copy job set-
tings.
8. {Energy Saver} key
Press to switch to and from Energy Saver
mode. See General Settings Guide.
9. {Interrupt} key
Press to interrupt a long copy job to make
copies. See p.20 “Interrupt Copy” .
10. Main power indicator and On
indicator
The main power indicator goes on when
you turn on the main power. The On in-
dicator lights when the power is on.
Important
❒ Do not turn off the main power
switch while the On indicator goes
on or is flashing. The hard disk
may malfunction.
ZLFS320N
RuC4_AE_Copy-F_FM_forPaper.book Page 5 Thursday, April 14, 2005 1:21 PM