Ricoh 3025 Printer User Manual


 
Copying from the Bypass Tray
27
2
Copying from the Bypass Tray
Use the bypass tray to copy onto spe-
cial paper such as OHP transparen-
cies, thick paper (postcards,
envelopes, etc.), adhesive label paper,
thin paper , and copy paper that can-
not be loaded in the paper trays.
Preparation
When copying from the bypass
tray, select [1 Sided] for copying in
[Dup. / Combine / Series] (for exam-
ple [1 Sided] [1 Sided] or [2 Sided]
[1 Sided]).
Note
The machine can automatically de-
tect the following sizes as standard
size copy paper:
Select the paper size when making
horizontal copies.
If you non-standard size copy pa-
per or special paper, you should
input its vertical and horizontal di-
mensions directly. See p.17 “Plac-
ing custom size originals”. The
sizes you can input are as follows:
When copying onto OHP transpar-
encies or paper heavier than 128
g/m
2
(about 34 lb.), you need to
specify the paper type. See p.29
“When copying onto special pa-
per” .
You must specify paper size when
using paper (tracing paper, etc.) of
less than 59g/m
2
thickness.
The maximum number of sheets
you can load at the same time de-
pends on paper type. The maxi-
mum number of sheets should not
exceed the upper limit.
Some kinds of envelope might
cause misfeed and wrinkle. If this
happens, push down the fusing
unit's green lever. See p.24 “Enve-
lopes”. Also, be sure to place the
front face of the envelope down-
ward.
Paper of 433 mm (17.0") in length,
or larger, is likely to jam, crease, or
not feed in properly.
When copying onto envelopes, see
p.24 “Envelopes”
A Open the bypass tray.
Metric
version
A3L A4K, A4L, A5L, 8" ×
13"L, B4 JISL, B5 JISK, B5
JISL, B6 JISL
Inch
version
11" × 17"L, 8
1
/
2
" × 14"L,
8
1
/
2
" × 11"L, 5
1
/
2
" × 8
1
/
2
"L,
10" × 14"L
Metric
version
Vertical: 90.0 – 297.0 mm
Horizontal: 148.0 – 600.0 mm
Inch
version
Vertical: 3.55" – 11.69"
Horizontal: 5.83" – 23.62"
RuC4_AE_Copy-F_FM_forPaper.book Page 27 Thursday, April 14, 2005 1:21 PM