Ricoh 3025 Printer User Manual


 
Copying
76
2
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
Storing a Program
Note
You can store up to 10 programs.
You can select the standard mode
or program No. 10 as the mode to
be set when modes are cleared or
reset, or immediately after the op-
eration switch is turned on. See
p.96 “Change Initial Mode” .
Paper settings are stored based on
paper size. However, if you have
more than one paper tray contain-
ing same size paper, the tray prior-
itized with User Tools (System
Settings) is selected first. See “Pa-
per Tray Priority” in “Tray Paper
Settings”, General Settings Guide.
Programs are not deleted by turn-
ing the power off or pressing the
{Clear Modes} key. They are can-
celed only when you delete or
overwrite them with another pro-
gram.
A Edit the copy settings so all func-
tions you want to store in this pro-
gram are selected.
B Press the {Program} key.
C Press [Register].
D Press the program number you
want to store.
Note
Program numbers displayed
with m next to them already
have settings.
Reference
p.77 “Changing a stored pro-
gram”
E Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.
Note
If you do not want to enter a
program name, proceed to step
F
.
ZLFS310N
RuC4_AE_Copy-F_FM_forPaper.book Page 76 Thursday, April 14, 2005 1:21 PM