Ricoh 3025 Printer User Manual


 
Placing Originals
17
1
Copy speed and scanning speed
can be reduced.
You can place originals of two dif-
ferent sizes at once.
Sizes of originals that can be placed
together using this function are as
follows:
A Press [Special Original].
B Press [Mixed Size], and then press
[OK].
C Align the rear and left edges of
the originals as shown.
1. Place into the ADF
2. Vertical size
D Adjust the guide to the size of the
widest original.
E Place the aligned originals face
up in the ADF.
F Press the {Start} key.
Placing custom size originals
When placing custom size originals in
the ADF, specify the size of the origi-
nals.
Note
Paper with a vertical length of 105–
297 mm (4.2"–11.6") and a horizon-
tal length of 128–1,260 mm (5.1"–
49.6") can be placed with this func-
tion.
A Press [Special Original].
B Press [Custm Size Origi.].
C Enter the horizontal size of the
original using the number keys,
and then press [#].
Note
If you make a mistake, press
[Clear] or the {Clear/Stop} key,
and then enter the value again.
D Enter the vertical size of the origi-
nal using the number keys, and
then press [#].
E Press [OK].
F Place originals, and then press the
{Start} key.
Metric
version
A3
L
, A4
K
, A4
L
, A5
K
, A5
L
,
B4 JISL, B5 JISK, B5 JISL
Inch
version
11" × 17"L , 8
1
/
2
" × 11"K,
8
1
/
2
" × 11"L , 5
1
/
2
" × 8
1
/
2
K,
5
1
/
2
" × 8
1
/
2
L, 8
1
/
2
" × 14"L,
10" × 14"L
A3
1
2
CP19AE
A4
RuC4_AE_Copy-F_FM_forPaper.book Page 17 Thursday, April 14, 2005 1:21 PM