Filter
Top Products
Troubleshooting
84
3
❖ Combine
❖ Duplex
Problem Causes Solutions
You cannot fold copies into
a book using the Booklet or
Magazine function.
Combine Original Booklet
Format or Combine Origi-
nal Magazine Format is not
set correctly.
Change the setting.
When using the Combine
function, parts of the image
are not copied.
You specified a reproduc-
tion ratio that does not
match the sizes of originals
and copy paper.
When you specify a reproduction
ratio using the Manual Paper Select
function, make sure the ratio match-
es originals and the copy paper.
Note
❒ Select the correct reproduction
ratio before using the Combine
function.
Copies are not in correct order.
You placed the originals in
incorrect order.
When placing a stack of originals in
the ADF, the last page should be on
the bottom.
If you place an original on the expo-
sure glass, start with the first page to
be copied.
Problem Causes Solutions
When using Duplex, copy
is made Top/Bottom even
though Left/Right is se-
lected.
You placed the originals in
the wrong orientation.
Place the originals in the correct ori-
entation. See p.13 “Original Orienta-
tion” .
Copies are not in correct order.
You placed the originals in
incorrect order.
When placing a stack of originals in
the ADF, the first page should be on
top.
If you place an original on the expo-
sure glass, start with the first page to
be copied.
RuC4_AE_Copy-F_FM_forPaper.book Page 84 Thursday, April 14, 2005 1:21 PM